Polyurethane Coatings
Con-Treat specialise in polyurethane coatings!
Con-Treat have a variety of durable, affordable and visually appealing polyurethane coatings.
Our polyurethane coatings offer substantial ongoing protection, waterproofing and stain resistance to a variety of surfaces and can be applied in both high gloss and matt finishes.
Concrete coatings for all purposes:
No matter whether your project is exterior or interior, Con-Treat has a polyurethane coating solution that is right for you. Our polyurethane coatings are suitable for:
- Large retail outlets
- Factories
- Showrooms
- Domestic projects and more
Tuff Coat
A high gloss, single pack polyurethane concrete coating. It is moisture cured with extremely high solids, achieving strength equivalent of a two pack polyurethane. Tuff Coat has excellent flow and weathering properties with extremely high adhesion qualities to Concrete & Stone. A long wet edge and low odour. Tuff Coat can be used in any application requiring a low maintenance, heavy duty, high gloss, stain resistant concrete floor coating. Specifications include: large retail outlets, factories, showrooms, and domestic projects.
Advantages are:
- Extremely high solids content
- High adhesion to concrete, timber & stone
- Pour straight from the can (no mixing)
- High build
- Can be tinted
- More than 2 coats may be applied in 1 day
- Can be catalysed (1 hour drying time)
- For satin finishes use Tuff Satin additive
- Low odour
- Scuff resistant
 more information...
Fortis 519 - UV
Fortis 519 is the ultimate polyurethane coating. A high gloss, single pack, aliphatic (non-yellowing) polyurethane. Fortis 519 contains UV absorbers which give protection to anything below the coating that is not uv stable. It is moisture cured with extremely high solids (68%), achieving the strength of a two pack polyurethane. Fortis 519 has excellent flow and weathering properties with extremely high adhesion qualities to Concrete, Timber & Stone. It has long wet edge and low odour. Fortis 519 can be used in any application requiring a low maintenance, heavy duty, high gloss or matt finish, stain resistant concrete floor coating.
Advantages are:
- Contains UV absorbers
- Non yellowing
- 68% solids content
- Extremely high adhesion
- Pour straight from the can (no mixing)
- High build
- Can be tinted
- More than 2 coats may be applied in 1 day
- Matt or gloss finish
- Low odour
- Tyre & scuff resistant
- Interior / exterior
more information...
Fortis Enviro
Fortis 526 Enviro is a water based, two pack, aliphatic polyurethane. It is non toxic, contains no harmful solvents and has no noxious odours. Fortis 526 Enviro polyurethane is highly suitable when a heavy duty, long wearing gloss or matt/satin finish coating is required for Concrete, Timber or Cork flooring. Highly scratch and chemical resistant with a medium solids content. Easy to apply, washes up in water and is environmentally friendly.
"LOOKING AFTER TOMORROW TODAY"
- Easy application
- Gloss or Matt / Satin Finish
- Indoor / Outdoor
- No bleaching of timber
- Excellent chemical resistance
- Durable & scratch resistant
- A finish very similar to solvent based polyurethane
- Non yellowing, UV stable
- No solvents, No odour
- Excellent adhesion to Concrete & Timber
- Higher coat build than any other water based finish
(Approximate Coverage = 12-15m2 per ltr)
more information...
When humidity levels exceed 75% proceed as follows:
- Leave re-coating until the following day
- Throughly sand the 1st coat, then vacuum clean
- Wipe down the 1st coat with xylene (or a compatible solvent) and allow a short period to dry
- Wipe excess xylene residue with a clean cloth & proceed with the 2nd coat.
* The above information is to be used as a guide only and Con-Treat accepts no responsibilty for any consequence resulting from the advice contained herein or verbally.
Contact Us
|
