Polyurethane Coating
Tuff Coat Concrete
Tuff Coat Concrete is a high gloss, single pack polyurethane coating that is moisture cured with extremely high solids (70%), achieving the strength of a two pack polyurethane. Tuff Coat Concrete has excellent flow and weathering properties with extremely high adhesion qualities to Concrete, Timber & Stone. It has long wet edge and low odour. Tuff Coat Concrete can be used in any application requiring a low maintenance, heavy duty, high gloss, stain resistant concrete floor coating. Tuff Coat Concrete has been specified in large retail outlets, factories, showrooms, and domestic projects.
Advantages are: 
- 70% Solids Content
- Extremely high adhesion
- Pour straight from the can (no mixing)
- High build
- Can be tinted
- More than 2 coats may be applied in 1 day
- Can be catalysed (1 hour drying time)
- For satin finishes use Tuff Satin additive
- Low odour
- Scuff Resistant
Tinting:
Con-Treat offer a wide selection of tints specifically designed for use in Tuff Coat. We have a broad range of colours available with finishes ranging from solid to translucent colours that will enable exposed aggregate to show through.
 Click here for colour chart
(please note: Our tints have been specifically designed for Tuff Coat Concrete and the use of any other tint is NOT recommended.)
 Photo Gallery
 Download MSDS
Download Technical Data;
Download Dry Slip Test
Download Wet Slip Test
Pedestrian Slip Resistance Guide
Guide to Concrete Preparation
- When humidity levels exceed 75% proceed as follows:
- Leave re-coating until the following day
- Throughly sand the 1st coat, then vacuum clean
- Wipe down the 1st coat with xylene and allow a short period to dry
- Wipe excess xylene residue with a clean cloth & proceed with the 2nd coat.
* The above information is to be used as a guide only and Con-Treat accepts no responsibilty for any consequence resulting from the advice contained herein or verbally.
Contact Us
Download free copy of Acrobat Reader
|
