Polyurea Crack Repair
Crack Fix is a two-part rapid cure, hybrid polyurea, elastomeric joint filler. It is used to fill and protect joints in industrial concrete floors subjected to heavy hard-wheeled vehicles. It is also ideal for spalled joint repair, random joint filling and patching, etc.
- Rapid Cure
- Trafficable 60 mins
- 100% Solids
- It is always good practise to use an epoxy primer on joints where movement of the concrete is likely.
- Ensure that the Crack Fix is warm. Either leave in the sun or warm with a heat gun.
Vigorously shake the cartridges before dispensing.
- Always discard the 1st 50mls of a new cartridge.
*The above information is to be used as a guide only and Con-Treat accepts no responsibilty for any consequence resulting from the advice contained herein or verbally.