Densi Proof Plus Surface Sheen

Densi Proof plus Surface Sheen is our original Densi Proof product with the addition of a breathable glossy surface membrane.

This long lasting product is designed for brand new, clean concrete and the sooner you get it on, the better. The best time to apply it is right after the finishers come off, since it also provides a superior concrete cure. This is because Densi Proof plus Surface Sheen holds in the hydrates and allows more cement to ultimately be used. What this means is you don't have to wait 28 or even 45 days or more to protect your concrete. It can be protected immediately. Unlike typical surface sealers, Densi Proof plus Surface Sheen penetrates deep (up to 200 mm) into the concrete to form a permanent, gel-like moisture barrier / waterproofer which can never be worn away. It also forms an attractive shiny sealer across the surface providing years of protection against the elements.

 Here are the top advantages to using Densi Proof plus Surface Sheen

1. Provides a tough and glossy surface finish
2. Waterproofs concrete internally as well as externally
3. Requires no special surface maintenance
4. Provides a more abrasion and crack resistant surface
5. Makes concrete virtually impermeable
6. Enhances surface bonding quality
7. Eliminates or significantly retards efflorescence
8. Reduces dusting
9. Remains resilient during movement
10. Provides increased density
11. Resists oil while repelling water
12. Enhances surface traction
13. Resists freeze-thaw damage
14. Provides easier ice removal
15. Improves fungus and mildew resistance
16. Preserves concrete's integrity
17. Improves thermal and acid & chemical resistance
18. Provides internal humidity stability and restricts vapor transmission
19. Eliminates internal water migration
20. Lowers chemical reaction and creep deformation potential
    

Note: This product is not recommended for older concrete, even if it looks perfectly clean. The main product, Densi Proof, decontaminates concrete as part of its action. That means it pushes up contaminants to the surface in a process that can be immediate or can take days. The sealing ingredient, Surface Sheen, seals the surface so well and so quickly that the contaminants will then be trapped just below the surface, causing an unsightly stain. If you are seeking both integral permanent waterproofing and surface sealing, we recommend that you use a two-step process: First, apply the Densi Proof, then after the contaminants have risen and been washed away, apply Luster Shield.

Densi Proof + Surface Sheen MSDS

Densi Proof + Surface Sheen Technical Data

Completed Projects

Technical data and Material Safety Data Sheets are available in PDF format. You will require Acrobat  Reader. If you do not have this please feel free to download this using the link below.

Download free copy of Acrobat Reader