Tramex Moisture Meters for Concrete & Timber

Tramex Moisture Meters & Hygrometers are specifically Designed for The Concrete & Timber Flooring Industry.

Tramex Concrete Moisture Meter (CME4)

The Tramex Concrete Encounter CME4 will give you an instant reading of moisture content to over 6% for Concrete and 0-10 comparative for Gypsum floor screeds, enabling you to make an informed decision on when to install the floor covering or a moisture barrier.
To use, simply switch on and press down the instrument firmly against the surface. Carry out unlimited non-destructive tests in seconds without the need to drill or damage the concrete.

Size = 150mm x 85mm x 38mm
Weight = 298 gr
Power = 9 Volt Battery
Display = Analog

Click here for more information

Tramex CRH Moisture Meter & Hygrometer Kit

The Tramex CRH kit allows you to carry out 4 individual tests:

1. Measure moisture content in Concrete & Gypsum floors.
2. Measure relative humidity, temperature & dew point within the

    slab using the (below surface) in-situ method.

3. Measure relative humidity, temperature & due point above the

    slab using RH hood test method.

4. Measure relative humidity, temperature & due point of the

    environment that the floor is being installed on.

Click here for more information