Luster Shield Projects - Concrete Coating 

Springfield University Tavern

Densi Proof was used as a moisture barrier and Luster Shield was applied as a floor finish on exposed aggerate. Two coats of Luster Shield were applied and buffed to a high shine giving the owners an extremly durable and low maintance floor for a fraction of the cost of polished concrete.
300m2.

YD Clothing Store

The owners of this store were after the 'Industrial Look'. The floor had a 3mm skim coat of levelling compound and then Luster Shield was applied. The installation was completed 1 hr prior to the shopping center opening with no effect to other traders. The floor was left to harden for 24 hrs before being buffed to a high shine. This is only one of many YD installations throughout Australia.
120m2.

Private Home

A single coat of Luster Shield was used to rejuvenate this weathered looking slate in an undercover courtyard. The application was completed using a painters flat pad.
45m2

Exposed Aggergate Driveway

Densi Proof was applied as a cure approx. 2 hrs after placement of the concrete. The driveway was then high pressure cleaned and a single application of Luster Shield was applied to protect from oil staining etc.

Pool Surround

Luster Shield was applied to the entire surrounds of this pool including the water feature. Luster Shield was used to protect the pavers from effloresecnce, chlorine damage and bought out the true colours of the pavers.