Concrete Waterproofing &
Concrete Protection
Permanent concrete waterproofing, moisture barrier, cure & seal.
For the protection of new or old concrete!
Densi-Proof is a environmentally friendly, non-flammable, liquid concrete waterproofing solution that has zero voc. It provides exceptional concrete waterproofing and can be used on new or old concrete. The Densi-Proof concrete waterproofing liquid has virtually nil solids and penetrates deeply into the capillarie voids of the concrete, depositing internally produced colloidal silicate residual (gel), that subsequently forms an insoluble unique 100% solids contaminant barrier. This100% solids sub-surface contaminant
barrier contains its very own extremely tiny pore network, uniquely, and effectively, mimicking the pouring
of concrete inside of concrete. Densi-Proof will even travel into concrete against water flow to permanently
stop moisture leakage.
Densi-Proof:
A one coat spray on system that deeply penetrates (up to 200 mm and beyond) into the matrix of the concrete providing permanent concrete waterproofing and protection. Densi-Proof
can be applied to new or old concrete to cure, purge oil etc and to seal the concrete from any contamination. Densi-Proof withstands a minimum of 35 m of Hydrostatic Pressure and can be effectively applied on the positive or negative side of concrete structures.
- Non-Toxic
- Zero VOC or VOS Content
- Environmentally Safe
- User Friendly
- Odourless
- Non-Flammable
 more information...
Moisture Fix 1:
A single pack (no mixing) ready to use, easy pour, broomed applied liquid moisture barrier. It deeply penetrates & forms a non-destructive colloidal gel which provides permanent concrete waterproofing / moisture barrier that withstands hydrostatic pressure. Moisture Fix is highly cost effective, has an extremely long shelf life and allows early access with minimum disruption. It is user friendly, non-toxic, non-flammable, zero VOC, environmentally safe and odourless.
more information...
Moisture Fix 2:
TIMBER....BATTENED, MECHANICAL FIX OR FLOATING FLOORS
Designed specifically for Battened (mechanical fix) Overlay, Loose Laid, or Floating Timber Floors where there is no direct stick adhesive required. Moisture
Fix 2 deeply penetrates and forms a non-destructive colloidal gel which provides a permanent concrete moisture barrier that withstands hydrostatic pressure. Moisture Fix 2 also has an amount
of special polymer blend to enable eradication of the problems encountered with vapour condensation in the cavity between the concrete substrate and the underside of the timber. You can't apply
too much of this product as all it does is leave an additional coating on top of the concrete that doesn't need to be removed as the battens aremechanically fixed and not glued.
more information...
Densi-Proof + Surface Sheen:
Designed for brand new, clean concrete and the sooner you get it on, the better. The best time to apply it is right after the finishers come off, since it also provides a superior cure. Densi-Proof plus Surface Sheen penetrates deep (up to 200 mm) into the concrete to form a permanent, gel-like moisture barrier / waterproofer which can never be worn away. It also leaves an attractive shiny sealer across the surface providing years of protection against the elements.
more information..
Densi-Proof + Surface Repeller:
Designed for brand new, clean concrete and the sooner you get it on, the better. The best time to apply it is right after the finishers come off, since it also provides a superior concrete cure. This is because Densi-Proof plus Surface Repeller holds the hydrates in, allowing more cement to ultimately be used. What this means is you don't have to wait 28 or even 45 days or more to protect your concrete. It can be protected immediately.
more information...
Densi-Proof Plus Anti Microbial (Medi-Vet):
- Eradicate's mould, microbes, acid, oil and body fats.
- Permanently waterproofs new or old concrete.
- Purges out years of contamination and odours from old slabs.
- Tested to 35mtrs of Hydrostatic pressure and 70 mtrs in the field.
- Protects against urine and chemical ingress.
- Will accept floor coverings or coatings after 24 hours.
- Early access, trafficable in 1 hour, minimum disruption.
- Environmentally safe and user friendly.
- Permanently improves the strength and integrity of your concrete.
more information...
Densi-Proof Plus Reo Protect:
Densi-Proof plus Reo Protect gives all of the same benifits of Densi-Proof with an added ingrediant for steel rebar protection. It penetrates deep (up to 200 mm!) into the concrete, surrounding the steel rebar with a permanent colloidal gel which prevents air or water reaching the rebar and causing corrosion. Densi-Proof plus Reo Protect is a permanent concrete moisture barrier & waterproofer, is easy to apply and environmentally friendly.
more information...
Contact Us
|
