Our Products
Concrete Waterproofing / Cure
Moisture FixDensi Proof
Densi Proof Plus Series
Reo ProtectSurface Repeller
Surface Sheen
Deep Clean
Anti-Microbial
Concrete Additive
Mix Water EnhancerCoatings / Sealers
Luster ShieldLuster Keep
Surface Repeller
Anti Slip
Tuff Coat Polyurethane
Tuff Coat Concrete
Tuff Coat Timber
Tuff Coat Enviro
Anti Graffiti
Anti Graffiti Coating
Graffiti Remover
Accessories
Graco Airless Sprayers
Tramex Moisture Meters
Floor Sanders & Polishers
Concrete Grinding Equipment
Accessories

Concrete Coating
Luster Shield - Concrete Coating
Luster Shield provides the protection of a tough membrane over concrete for a glossy finish & also gives the ultimate in stain resistance & UV protection.
Luster Shield is a high quality, water repellent, penetrating membrane, that when applied and fully dried/cured, develops into a strong, durable, flexible, and breathable film coating which adheres tenaciously to clean bare concrete surfaces, render and masonry. Luster Shield a is non-flammable, odourless, penetrating coating that will dry to a clear attractive satin finish.
Luster
Shield was developed to protect today's decorative concrete surfaces and to provide the same protection to plain, grey concrete. Luster
Shield is similar to Surface Save & Seal, in that it provides a tough breathable membrane coating, yet has the Surface Repeller's highly desirable feature of making surfaces
more stain resistant. (For more information on Surface Save
& Seal or Surface Repeller, refer to their Technical Data Sheets).
Luster
Shield helps to maintain cleaner surfaces and preserve the original appearance of the treated surface for a much longer period of time. Luster
Shield prevents the penetration of water, liquids and other contaminants into the treated surface. Luster
Shield is an excellent waterproofer that will improve fungus and mildew resistance. Luster
Shield also significantly retards efflorescence while imparting significant additional resistance against freeze-thaw damage, such as cracking &
spalling.
Tuff Coat Concrete - Polyurethane Coating for Concrete Floors!
Tuff Coat Concrete is a high gloss, single pack polyurethane coating
available in either non uv or uv stable. It is moisture cured with extremely high solids (70%), achieving the strength of a two pack polyurethane.
Tuff Coat Concrete has excellent flow and weathering properties with extremely high adhesion qualities to Concrete & Stone. It has long wet edge and low odour. Tuff Coat Concrete can be used
in any application requiring a low maintance, heavy duty, high gloss, stain resistant floor coating. Tuff Coat Concrete has been specified in large retail outlets, factories, showrooms, and domestic
projects.
Advantages are:

- Non UV or UV Stable
- 70% Solids Content
- Extremely high adhesion
- Pour straight from the can (no mixing)
- High build
- Can be tinted
- More than 2 coats may be applied in 1 day
- Can be catalysed (1 hour drying time)
- For satin finishes use Tuff Satin additive
- Low odour
- Scuff Resistant
Tinting:
Con-Treat offer a wide selection of tints specifically designed for use in Tuff Coat Concrete. We have a broad range of colours available with finishes ranging from solid to opaque colours
that will enable exposed aggregate to show through.
Click
here for colour chart
Tuff Coat Enviro - Water Based Polyurethane
Tuff Coat Enviro is a water based polyurethane that contains no harmful solvents, is non-toxic, and has no noxious odours. Tuff Coat Enviro Polyurethane is highly suitable when a heavy duty, long wearing gloss or satin finish coating is required for Concrete, Timber or Cork flooring. Highly scratch and chemical resistant with a high solids content (45-50%). Easy to apply, washes up in water and is environmentally friendly.
"LOOKING AFTER TOMORROW TODAY"
- Easy application
- Gloss or Satin Finish
- No bleaching of timber
- Excellent chemical resistance
- Durable
- Appearance of finish very similar to solvent based polyurethane
- Flexible and scratch resistant
- Non yellowing
- No solvents, No odour
- Excellent adhesion to Concrete, Timber, Cork and between coats
- Higher coat build than any other water based finish
(Approximate Coverage = 10-15m2 per ltr)

The "Eco Village" at Currumbin on the Gold Coast uses and promotes Tuff Coat Enviro for the sealing of the Concrete and Timber floors throughout the village. Tuff Coat Enviro meets all of the stringent criteria set out by the Eco Village for an environmentally friendly product.
Download free copy of Acrobat Reader